HP Direct-Connect External SAS Storage for HP BladeSystem Solutions Depoyment Guide

HP MSL2024, MSL4048, and MSL8096 Tape Libraries and 1/8 G2 Tape
Autoloader
The HP MSL2024, MSL4048, and MSL8096 Tape Libraries and 1/8 G2 Tape Autoloader provide
compact, high-capacity, low-cost solutions for simple, unattended data backup. The Libraries house
12 tape cartridges for each 1U of height, with easy access to tape cartridges via removable
magazines and one or more mailslots. The Autoloader houses up to eight tape cartridges in a
compact 1U form factor with easy access to tape cartridges via two removable magazines and a
configurable mailslot. The MSL2024, MSL4048, and MSL8096 Libraries can be partitioned into
multiple logical libraries for optimal configuration flexibility in a shared storage environment.
The Libraries and Autoloader are compatible with most operating systems. Tape backup requires
either direct support from the operating system or a compatible backup application to take full
advantage of the many features. To verify compatibility review the Design Guide, or for white
papers and examples, go to http://www.hp.com/go/ebs. The SAS Libraries and Autoloader
support LTO Ultrium tape drives.
For more information
HP Automation website: http://www.hp.com/go/automation
HP Enterprise Backup Solutions website: http://www.hp.com/go/ebs
HP Library and Tape Tools website: http://www.hp.com/support/tapetools
Be sure to read the following documents that are included on the documentation CD shipped with
the Library or Autoloader:
• HP MSL2024 Tape Library getting started, HP MSL4048 Tape Library getting started, HP
MSL8096 Tape Library getting started, or HP 1/8 G2 Tape Autoloader getting started—Includes
overview information about the tape library and its installation and configuration procedures.
• HP MSL2024, MSL4048, and MSL8096 Tape Libraries user and service guide and HP 1/8
G2 Tape Autoloader user and service guide—Includes detailed hardware reference,
maintenance, and service information.
Important tips
• Connectivity differs depending on the firmware version installed on the HP 3Gb SAS BL Switch:
Firmware versions earlier than 2.0.0: All servers containing a P700m Controller are
automatically connected to all tape libraries. This is not configurable.
◦
◦ Firmware versions 2.0.0 or later: Switch-port zone groups must be created and assigned
to server bays to grant access to the tape library.
HP MSL2024, MSL4048, and MSL8096 Tape Libraries and 1/8 G2 Tape Autoloader 35