HP StorageWorks 600 Modular Disk System Maintenance and Service Guide

Removal and replacement procedures 26
3.
Extend the hard drive drawer.
WARNING: Pinch hazard—
Keep hands out of front and rear of chassis when closing hard drive
drawers.
CAUTION: To prevent improper cooling and thermal damage, do not operate the MDS600 for
an extended period of time with the drawer open.
Hard drive blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the MDS600
unless all bays are populated with either a component or a blank. Remove a blank only when
there is a drive ready to install or the MDS600 is powered down.
To remove the component:
1. Extend the hard drive drawer (on page 25).