HP StorageWorks 600 Modular Disk System Maintenance and Service Guide

Removal and replacement procedures 30
For the location of these device bays, see "Device bay ID numbers (on page 59)."
5. Remove the hard drive drawer bezel ("Hard drive drawer bezel" on page 28).
6. Remove the T-15 Torx screw securing the display board assembly to the hard drive drawer, and then lift
the assembly straight up to remove it from the drawer.
7. Turn the display board assembly over, remove the two T-15 Torx screws securing the board to the cover,
and lift the board straight out.