Manualshelf

HP StorageWorks 600 Modular Disk System Maintenance and Service Guide

ManualsBrandsHP ManualsStorageHP MDS600 with (70) 300GB LFF SAS Bundle
31323334353637383940
Removal and replacement procedures 38
9.
Slowly remove the power block. The signal and power cables are still attached.
10. While supporting the power block, disconnect the signal and power cables on each side of the power
block.
To replace the component, reverse the removal procedure.
Hard drive drawer
To remove the component:
1. Power down the MDS600 ("Power down" on page 25).
2. Disconnect all cables.
3. Remove all power supplies ("Power supply" on page 34).
4. Remove all fan modules ("Fan" on page 31).
5. Remove all hard drives ("Hard drive" on page 27).