Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA P6000 for Linux B.12.00.00

Figure 4 Creating modular package
4. If the product Metrocluster with Continuous Access EVA P6000 for Linux Toolkit is installed,
you will be prompted to configure a Metrocluster package. Select the dts/mccaeva module,
and then click Next.
Figure 5 Selecting Metrocluster module
5. You will be prompted next to include any other toolkit modules. In case, application being
configured has a Serviceguard toolkit, select the appropriate toolkit; otherwise, move to the
next screen.
6. Enter the package name. Metrocluster packages can be configured only as failover packages.
Make sure that this option is selected as shown in Figure 6 (page 23) and then click Next.
Figure 6 Configuring package name
7. Select additional modules if required by the application. For example, if the application uses
LVM volumegroups or VxVM diskgroups, select the volume_group module. Click Next.
Installing and configuring an application 23