Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access XP P9000 for Linux B.12.00.00

9. You are prompted to configure the attributes for a Metrocluster package. Ensure that all the
mandatory attributes (marked *) are accurately filled.
Figure 8 Configuring Metrocluster P9000/XP parameters
10. Enter the values for other modules selected in step 7.
11. After you enter the values for all the modules, review all the inputs given to the various attributes
in the final screen. If you want to validate the package configuration click on Check
Configuration, else click on Apply Configuration.
Figure 9 Apply the configuration
26 Configuring an application in a Metrocluster environment