Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access XP P9000 for Linux B.12.00.00

• pairsplit for asynchronous mode might take a long time depending on how long the
synchronization takes. There is a potential for the Continuous Access link to fail while
pairsplit is in progress. If this happens, pairsplit will fail with a return code of
EX_EWSUSE.
• In most cases, Metrocluster/Continuous Access in asynchronous mode behaves the same as
when the fence level is set to NEVER in synchronous mode.
Other considerations on asynchronous mode 47