HP ProLiant Storage Server SAN Connection and Management

STEP 4: Connect the appropriate fiber cables to the HBA card(s).
STEP 5: Install SecurePath Manager (optional).
If you use SecurePath, and want to install SecurePath Manager, see Section 6
Section 2: EVA – Enterprise Virtual Array
STEP 1: Verify that the FC HBA driver version, firmware, and Boot BIOS are
installed.
KGPSA-CB
176479-B21
FCA2101 FCA2355
FCA2404
FCA2404DC
EVA5000
EVA3000
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
EVA8000
EVA6000
EVA4000
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 3.92a2
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
FCA2408
FCA2214
FCA2214DC
A7387A
A7388A
A7560A
EVA5000
EVA3000
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
SCSIPort: 9.0.2.11
StorPort: 9.0.2.16
Firmware: 1.45
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70.a1
EVA8000
EVA6000
EVA4000
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
SCSIPort: 9.0.2.11
Firmware: 1.34
SCSIPort: 5-5.10a11
StorPort: 5-5.1.02a7
Firmware: 1.90a4
Boot Bios: 1.70a1
The above table shows the latest driver/firmware/Boot Bios for the supported FC HBAs. Check the HP web
site
http://www.hp.com/go/eva for the updates.
Note: Windows Storage Server 2003 R2 and Windows 2003 32-bit are identical for the purpose of this
compatibility table.
Contact HP Service and Support for the following reasons:
- To get the latest driver version, firmware, or BOOT BIOS for your HBA drivers
- If your HBA PCI cards are not listed in the table above
If you update the HBA driver version, firmware, or BOOT BIOS is required, be sure to reboot the system
after the update before you continue.
STEP 2: Verify that the firmware version for the EVA array is installed.
EVA 3000/5000 Firmware Revision: 3.028 or 4.001
EVA 4000/6000/8000 Firmware Revision: 5.030
Contact HP Service and Support to get the latest firmware version for your storage array. If you update the
firmware, reboot the system after the update before you continue.
4