HP ProLiant Storage Server SAN Connection and Management

• Extended Configuration:
o Select Extended Configuration during installation, if you have an Extended
Configuration for your back-end storage array. An extended configuration should be
selected when five or more Window Servers have exclusive access to the same RAID
arrays.
• HS Service:
o Select HS Service during installation if you require logging environmental changes
within your storage system in the Windows Application Event Log.
STEP 4: Install the Multipath software (SecurePath).
HP SecurePath version: v4.0C SP2
To obtain HP StorageWorks SecurePath:
http://www.hp.com/go/SecurePath
Do not install the AutoPath driver when prompted during installation.
Reboot the system after the software installation before you continue
STEP 5: Connect the appropriate fiber cables to their respective HBA card(s).
STEP 6: Install SecurePath Manager (optional).
If you use SecurePath, and want to install SecurePath Manager, see Section 6
Section 6: SecurePath Manager (Optional)
Secure Path Manager (SPM) provides web-based management capability for cross-platform Secure Path
configurations. This application displays a graphical representation of multiple path configurations,
indicating the status of a user-defined set of hosts, storage systems and paths. SPM runs on web-based
clients that support Sun Java™ 2 Runtime environment (JRE) Version 1.3.1 or later.
To obtain HP StorageWorks SecurePath:
http://www.hp.com/go/SecurePath
Important:
Currently, HP NAS only supports SecurePath Manager (SPM) version 4.0C or later. If you have older SPM
versions, contact HP Service and Support and upgrade, if you want to use SPM on your NAS system.
HP Insight Manager must be installed for administrators to use SecurePath Manager.
SPM can be accessed on web-based clients that have Sun Java 2 Runtime Environment (JRE) version 1.3.1,
or later, installed.
9