HP mc-Series 5042 Rack Options Installation Guide

Hook Up Kit 34
7.
Using a T-25 Torx screwdriver and the eight M5.5 x 10 self-tapping screws from this kit (four screws per
bracket), secure the two support brackets to the rear frame in approximately equal distances between
the hose connections in the MCS 5042 and the top plate.
8. Open the clamps and insert the hoses. Insert the screws that came with the clamps from the front of the
MCS 5042 to the back, and use a Phillips screwdriver to secure the hoses into the clamps.
(Optional) Shortening the hoses
1. Using the L-key (supplied with this kit), remove the four M6 screws on the clam shell clamp, turning each
screw one turn until they are all equally loose and can be removed. Retain screws to reinsert later.