HP mc-Series 5042 Rack Options Installation Guide

Hook Up Kit 35
2.
Remove the clam shell clamp from around the hose and remove the swivel nut from the end of the hose.
3. Using a hacksaw, cut the end of the hose to the desired length.
4. Insert the swivel nut into the end of the hose and then replace the clam shell clamp around the hose.
NOTE: The shorter screws do not reach the threads of the clam shell until the clam shell is
tightened. Therefore, you must use the longer screws first to tighten and secure the clam shell, and
then you can replace the longer screws with the original shorter screws.