HP mc-Series 5042 Rack Options Installation Guide

Hook Up Kit 36
5.
Insert the four longer M6 screws included in the kit to secure the clam shell clamp around the hose.
6. Using the L-key, tighten the longer M6 screws one turn at a time, tightening all four screws evenly. The
clamp must be tight enough for the four shorter M6 screws to reach.
7. One hole at a time, replace the longer M6 screws with the original shorter M6 screws.
8. When you have replaced all four longer M6 screws with the original shorter M6 screws, use the L-key
to fully tighten each screw.
Attaching the main hose to the facility water line
1. Attach the main hoses to the facility water lines, and then hand tighten the swivel nut.