HP Modular Cooling System Generation 2 site preparation guide - Technical white paper

15
System positioning
The HP MCS G2 can be installed next to an existing or new row of HP 10000 Series racks. Based on
facility design requirements, the cabinets can be arranged in a flush front (figure 9A) or flush rear
(figure 9B) configuration.
Figure 9: HP MCS G2 arranged in a HP 10000 Series rack row
A: Flush front configuration
B: Flush rear configuration
Note:
Be aware of the potential for slight front or rear door swing interference
when arranging the HP MCS G2 immediately next to a HP 10000 Series
rack, depending on the configuration. Equipment may require the removal
of a door for full, unimpeded access.