HP Modular Cooling System Generation 2 site preparation guide - Technical white paper

7
HP MCS G2 specifications
Physical specifications
Table 2 lists the physical specifications of a single HP MCS G2 and server cabinet as received from
the factory.
Table 2: HP MCS G2 physical specifications (single rack configuration)
Parameter
Packaged system
(as shipped on pallet)
Unpackaged system
(off pallet, unwrapped)
Unpackaged
CTO system
Height
2,280 mm (89.85 in.)
2,017 mm (79.4 in.)
2,017 mm (79.4 in.)
Width
1,219 mm (48 in.)
909 mm (35.8 in.)
909 mm (35.8 in.)
Depth
1,829 mm (72 in.)
1,301 mm (51.2 in.)
1,301 mm (51.2 in.)
Weight
688 kg (1,516 lb)
1
435 kg (960 lb)
2
1,510 kg (3,330 lb)
3
Note:
The top shipping bracket can be removed if it interferences with deploying
the MCS. With the top shipping bracket, the total height is 2,069 mm
(81.5 in.) of the unpackaged system.
Electrical specifications
Table 3 lists the electrical specifications for the HP MCS G2.
Table 3: HP MCS G2 electrical specifications
Parameter
Value
Comments
Operating voltage:
Minimum
Maximum
180 VAC
240 VAC
AC line frequency
50/60 Hz
AC line phase
Single
Rated input current
15 A
Per line cord
Maximum inrush current
43 A
Per line cord
Dropout/hold-up time at minimum line
voltage
20 ms
Circuit breaker rating
LAHJ
Per cord
Power factor
> 0.7
At all loads
Ground leakage current
< 3.0 mA
Per line cord
Maximum power consumption
(HP MCS G2 only)
1,900 W at 208 V
2,400 W at 240 V
Steady state
Power cords
(included with HP MCS G2)
208 V, 20 A
NEMA L6-20-to-C19 (Qty 2)
240 V, 16 A
IEC 309-to-C19 (Qty 2)
1
Weight for a completely packaged system with unpopulated server rack
2
Weight for an unpackaged system with unpopulated server rack
3
Approximate weight for an unpackaged CTO system; actual weight will vary according to configuration