HP Modular Cooling System Site Preparation Guide

Chapter 3
HP MCS Installation Guidelines
Introduction
This chapter describes basic methods and provisions for installing the HP MCS. For more
information on installing the HP MCS refer to the HP MCS Installation Overview (document part
number 399330-001), downloadable from
www.hp.com.
System Positioning
The HP MCS can be installed next to an existing or new row of HP 1000 Series racks. Based on
facility design requirements, the cabinets can be arranged in a flush front (Figure 19A) or flush rear
(Figure 19B) configuration.
Figure 19. HP MCS Arranged In A Flush Front Configuration with a HP 10000 Series Rack Row
A: Flush Front Configuration
B: Flush Rear Configuration
HP MCS Site Preparation Guide
38