HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Read onlyAccess
Alias for the iSCSI initiator.Description
qsrIsInitAddressType
InetAddressTypeSyntax
Read onlyAccess
Type of iSCSI initiator’s IP address (IPv4 or IPv6).Description
qsrIsInitAddress
InetAddressSyntax
Read onlyAccess
IP address of the iSCSI initiator.Description
qsrIsInitStatus
INTEGERSyntax
1 = unknown
2 = loggedIn
3 = loggedOut
4 = recovery
Read onlyAccess
Status of the iSCSI initiator: whether or not it is logged in to the router.Description
qsrIsInitOsType
SnmpAdminStringSyntax
Read onlyAccess
The type of the iSCSI initiator’s operating system.Description
qsrIsInitChapEnabled
Integer: 0 = enabled; 2 = disabledSyntax
Read onlyAccess
A value indicating whether CHAP is enabled or not for this iSCSI initiator.Description
LUN table
This table contains information about the logical unit number (LUN) list.
qsrLunTable
SEQUENCE OF QsrLunEntrySyntax
Not accessibleAccess
A list of the LUNs on the Fibre Channel targets discovered by the router. There are as many
entries in this table as there are Fibre Channel targets on the router.
Description
qsrLunEntry
QsrLunEntrySyntax
Not accessibleAccess
Each entry (row) contains information about a specific LUN. This table extends
scsiDscLunTable in QLOGIC-SCSI-MIB. The entries in this table show other attributes of
the LUN.
Description
Management Information Base 109