HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Fibre Channel target device discovery notifications are sent for the Fibre Channel target event,
which consist of:
• State: Discovered, went offline, or went online
• Target WWPN
• Blade number (1 or 2)
Target presentation (mapping)
The target presentation notification indicates that the specified target has been presented (mapped)
or unpresented (unmapped).
qsrPresTgtMapped uses the following objects:
• qsrBladeSlot
• qsrEventTimeStamp
• qsrPresTgtMapped
• qsrPresTgtUnmapped
• qsrEventSeverity
Target presentation notifications are sent for the target presentation event, which consists of:
• State: Presented (mapped) or unpresented (unmapped)
• Target name
• Blade number (1 or 2)
Virtual port group notification
The virtual port group notification indicates that the specified virtual port group is enabled or
disabled. It also represents change in the name of the virtual port group.
qsrVPGroupStatusChanged uses the following objects:
• qsrBladeSlot
• qsrVPGroupIndex
• qsrVPGroupStatus
• qsrEventTimeStamp
• qsrEventSeverity
Virtual port group notifications are sent for the following events:
• Change in name of a virtual port group
• Enabling and disabling a virtual port group
Sensor notification
The sensor notification indicates that the state for the specified sensor is not normal. When the
sensor returns to the normal state, this event is sent with the qsrEventSeverity object set to
clear. qsrSensorNotification uses the following objects:
• qsrSensorValue
• qsrSensorState
• qsrEventTimeStamp
• qsrEventSeverity
116 Simple Network Management Protocol