HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
initiator task tag provided in the
initial login PDU.
iSCSI login PDU was received with
a TSIH out of range. This occurs if
ErrorAppQLIS_LoginPduContinue: TSIH 0x%x out
of range
41283
the iSCSI initiator attempting the
login failed to used the TSIH value
provided in the Target Login
Response PDU (router is target) in
subsequent login PDUs.
iSCSI Login PDU was received with
an invalid TSIH value. The TSIH is
ErrorAppQLIS_LoginPduContinue: Session does
not exist, invalid TSIH 0x%x
41284
invalid because there is no session
with that TSIH value. This occurs if
the iSCSI initiator attempting the
login failed to used the TSIH value
provided in the target login response
PDU (router is target) in subsequent
login PDUs.
iSCSI Login rejected due to a CHAP
authentication error.
ErrorAppQLIS_LoginPduContinue: Session does
not exist, invalid TSIH 0x%x
41353
iSCSI Login rejected due to a CHAP
key error.
ErrorAppQLIS_LoginPduContinue: Unexpected CHAP
key detected
41354
Failed to allocate an object for Set
Port Info IOCTL processing:
ErrorAppQLBI_SetPortInfo:
QLUT_AllocatePortalObject failed
(PortType 0x%x, PortId 0x%x)
41508
PortType: 0 = Fibre Channel, 1 =
iSCSI
PortId: 0 = FC1 or iSCSI1(GE1), 1 =
FC2 or iSCSI2 (GE2)
Inquiry command failed. The Inquiry
command was issued by the router
as part of its discovery process.
ErrorAppQLBI_GetLunInfo: INQUIRY failed, TPB
status 0x%x
41626
Pass-Through command for Inquiry
command for page 83 failed. The
ErrorAppQLBI_GetLunInfo: INQUIRY failed, TPB
status 0x%x
41629
Inquiry command was issued by the
router as part of its discovery
process.
Pass-Through command for Read
Capacity command failed. The Read
ErrorAppQLBI_Passthru: Invalid data length %d
bytes
41635
Capacity command was issued by
the router as part of its discovery
process.
Read Capacity command failed. The
Read Capacity command was issued
ErrorAppQLBI_GetLunInfo: INQUIRY failed, TPB
status 0x%x
41636
by the router as part of its discovery
process.
Pass-Through command issued by
management tool (such as GUI) was
aborted.
ErrorAppQLBI_GetLunInfo: INQUIRY failed, TPB
status 0x%x
41696
Pass-Through command issued by
management tool (such as GUI) failed
due to invalid CDB length.
ErrorAppQLBI_Passthru: Invalid CDB length %d
bytes
41700
121