HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
Pass-Through command issued by
management tool (such as GUI) failed
due to invalid data length.
ErrorAppQLBI_Passthru: Invalid data length %d
bytes
41701
Pass-Through command issued by
management tool (such as GUI) was
interrupted or timed out.
ErrorAppQLBI_Passthru: Invalid data length %d
bytes
41717
IOCTL operation unsupported.
Operation code provided in log
message.
ErrorAppQLBI_Ioctl: ERROR: Operation (0x%x)
not supported in this mode
41750
Report LUNs command failed. The
Report LUNs command was issued
ErrorAppQLBI_GetLunList: REPORT LUNS command
failed
41768
by the router as part of its discovery
process.
Report LUNs command failed with
check condition status. The Report
ErrorAppQLBI_GetLunList: REPORT LUNS command
failed with CHECK CONDITION, SCSI
STATUS 0x%02X
41769
LUNs command was issued by the
router as part of its discovery
process.
Failed to allocate LUN object; out of
resources.
ErrorAppQLBI_GetLunList: Lun allocation failed
for LunId %d
41771
Login attempted using Fibre Channel
virtual VP index that is out-of-range
ErrorAppQLFC_Login: VpIndex (%d) out of range41994
(range = 0–31). Index reported in
log message.
Login attempted using Fibre Channel
VP index that has not been
ErrorAppQLFC_Login: VP Index 0x%x not
configured
41995
configured. Operation attempted on
an unconfigured VP.
Attempting login but Fibre Channel
connection cannot be opened.
ErrorAppQLFC_Login: Can't open connection42002
Attempting logout of device for which
there is no active path (WWPN not
found).
ErrorAppQLFC_Logout: No active path to device.
WWPN: %.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X
42024
Logout attempted using Fibre
Channel VP index that has not been
ErrorAppQLFC_Logout: VP Index 0x%x not
configured
42027
configured. Operation attempted on
an unconfigured VP.
Event notification; Fibre Channel
processor encountered a system error
(unrecoverable firmware error).
ErrorAppQLFC_HandleTeb: System Error42068
Event notification; Fibre Channel
driver encountered a fatal error.
ErrorAppQLFC_HandleTeb: Driver Fatal Error42069
Event notification; Fibre Channel port
logged out.
ErrorAppQLFC_HandleTeb: Driver Fatal Error42072
Failed to allocate object for iSCSI
session; out of session resources.
ErrorAppQLIS_AllocateSessionObject: Out of
session resources
42242
Received iSCSI PDU with duplicate
CmdSN. Command PDU will be
dropped.
ErrorAppQLIS_EnqueueiScsiPdu: Duplicate PDU,
CmdSN %d (0x%x), dropping it
42252
122 Log messages