HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
Unable to allocate iSCSI initiator
object while instantiating session.
ErrorAppQLIS_InstantiateSession: Can't add
Initiator to the database
42258
iSCSI session login rejected because
the maximum number of allowed
hosts are already logged in.
ErrorAppQLIS_InstantiateSession: Maximum
number (%d) of allowed hosts already
logged in
42259
Failed to execute iSCSI Command
PDU because its CmdSN is
ErrorAppQLIS_InstantiateSession: Maximum
number (%d) of allowed hosts already
logged in
42404
out-of-range. Log message contains
the incorrect CmdSN, the valid
CmdSN range, the first byte of the
CDB, and the data length.
Event notification; iSCSI driver
encountered a fatal error.
ErrorAppQLIS_HandleTeb: Driver Fatal Error42648
Event notification; an IOCTL request
was received to unload the iSCSI
driver.
ErrorAppQLIS_HandleTeb: Unload Driver42649
Event notification; attempt to connect
to the iSNS server failed.
ErrorAppQLIS_HandleTeb: iSNS Connection Failed42654
Failed to allocate memory for TPB
extension.
ErrorAppQLUT_AllocateTpbExtension: TPB
allocation failed
43265
Failed to allocate DSD (buffer length
%d).
ErrorAppQLUT_AllocateTpbExtension: Alloc of
DSD failed for buffer len %d
43267
Failed to allocate data buffer (length
%d).
ErrorAppQLUT_AllocateTpbExtension: Data buffer
allocation failed (length %d)
43268
An error occurred on an I/O that
was issued for a migration job. The
ErrorAppQLDM_HandleMigError: Migration Job %d
stopped for Src Lun %hd Dest Lun %hd
44549
message provides the job ID, source,
Error %x AdditionalErrorStatus %x at
line %d
and destination LUN IDs, as well as
the error.
Router is booting up.InfoAppSystem Booting Up.53254
Decompression failed. Disabling
compression temporarily.
InfoAppQLBA_ProcessTpb: De-compression
failed. Disabling compression
temporarily
53357
iSCSI session full feature login.InfoAppQLIS_LoginPduContinue: [0x%x]
SES_STATE_LOGGED_IN NORMAL
53584
iSCSI session discovery login.InfoAppQLIS_LoginPduContinue: [0x%x]
SES_STATE_LOGGED_IN DISCOVERY
53585
iSCSI login of Initiator: %s.InfoAppQLIS_LoginPduContinue: Initiator: %s53586
iSCSI login of Target: %s.InfoAppQLIS_LoginPduContinue: Target: %s53587
Fibre Channel login occurred, origin
xx (1 = adapter, 2 = target, 3 =
InfoAppQLFC_Login: Origin 0x%x, VP Index
0x%x, Id 0x%x
54274
initiator), VP (virtual port) xx, ID (loop
ID) xx.
Fibre Channel login occurred with
port ID xx.xx.xx.
InfoAppQLFC_Login: Port ID %.2x%.2x%.2x54275
Fibre Channel login occurred with
WWNN xx.xx.xx.xx.xx.xx.xx.xx.
InfoAppQLFC_Login: Node Name
%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x
54276
123