HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
Failed to start a delayed schedule
job.
InfoAppQLDM_DelayedStart:%d Failed to start
job : Job ID: %d
56865
Migration add failed because LUN
is part of another migration job.
InfoAppLun is already used for of some other
migration job
56866
Migration being added with a LUN
that is a controller LUN. Data LUNs
InfoAppSelected Lun is a Controller Lun56867
are required for configuring
migration jobs.
Migration job being added for a
LUN that is masked to an initiator on
InfoAppSelected Lun is Masked, It cant be
used for Offline Migration
56868
the router. Mapped LUNs cannot be
used for offline migration jobs.
Migration job being added for a
LUN for which no read capacity
InfoAppRead Capacity is not available for the
Lun
56869
Information is available. Migration
add will fail.
Failed to allocate memory for the
source LUN of a migration job.
InfoAppQLDM_CreateMigrationObject: Failed to
create Source Lun Object
56870
Failed to allocate memory for the
destination LUN of a migration job.
InfoAppQLDM_CreateMigrationObject: Failed to
create Destination Lun Object
56871
Failed to allocate memory for the
migration job.
InfoAppQLDM_CreateMigrationObject:
MigrationObject memory unavailable
56872
The log shows the configured start
time and current time for a delayed
migration job.
InfoAppStart time got from user %lu Cur Time:
%lu Diff: %d
56880
Failed to stop a migration job; the
error message includes the job ID.
InfoAppFailed to stop migration job id %u56881
Did not find a migration job for the
associated LUN object.
InfoAppQLDM_DeleteMigrationJobByLun: Could
not find migration object
56884
iSCSI processor SRAM test failed.FataliSCSI#%d: qlutm_init: Diagnostic failed,
invalid SRAM
69652
iSCSI processor failed diagnostic
reboot.
FataliSCSI#%d: qlutm_init: Diagnostic failed,
fail reboot
69653
iSCSI processor failed NVRAM
diagnostic.
FataliSCSI#%d: qlutm_init: Diagnostic failed,
invalid NVRAM
69654
iSCSI processor failed DRAM
diagnostic.
FataliSCSI#%d: qlutm_init: Diagnostic failed,
invalid DRAM
69655
iSCSI processor failed to return
diagnostic results.
FataliSCSI#%d: qlutm_init: Failed to return
diagnostic result to Bridge
69656
Response queue entry contains an
invalid handle.
FataliSCSI#%d: QLUtmProcessResponseQueue:
Invalid handle %x EntryType %x
69941
Set NVRAM reboot timer failed.FataliSCSI#%d: QLSetNvram: QLRebootTimer failed
AF %x RS %x Time %d
69951
Port disable reboot timer failed.FataliSCSI#%d: QLDisable: QLRebootTimer failed
AF %x RS %x Time %d
69964
Port enable reboot timer failed.FataliSCSI#%d: QLEnable: QLRebootTimer failed AF
%x RS %x Time %d
69966
125