HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
RunTimeMode (0 = loop, 1 =
point-to-point).
An RSCN was received. Event status
is reported, as is the RSCN
information.
InfoFC#%d: QLIsrEventHandler: RSCN update
(%x) rscnInfo: %x
119093
Fibre Channel port update. Event
status is reported, as is the contents
InfoFC#%d: QLIsrEventHandler: Port update
(%x) mb1-3 %x %x %x
119097
of the Fibre Channel processor’s
mailbox 1, 2, and 3 registers.
A virtual port logged into a device,
but the device rejects the login.
InfoFC#%d: QLTimer: VP %d discover a reject
device PID %02x%02x%02x
119144
Update NVRAM for the invalid Serial
Link Control for mezzanine platform.
InfoFC#%d: QLFlashGetNvram: Invalid Serial
Link Control 0x%x for port %d
120278
For FCoE protocol, the Data Center
Bridging Exchange protocol
completes.
InfoFC#%d: QLIsrEventHandler: DCBX Completed
(%x)
120373
For FCoE protocol, the Inter-Driver
Communication completes.
InfoFC#%d: QLIsrEventHandler: IDC Completion
(%x) %x, %x, %x, %x, %x, %x, %x
120374
For FCoE protocol, the IDC
notification comes from another
driver.
InfoFC#%d: QLIsrEventHandler: IDC
Notification (%x), %x, %x, %x, %x, %x,
%x, %x
120375
For FCoE protocol, the IDC time
extended notification receives.
InfoFC#%d: QLIsrEventHandler: IDC Time
Extended (%x), %x, %x, %x, %x, %x, %x,
%x
120376
For FCoE protocol, the DCBX
protocol has started.
InfoFC#%d: QLIsrEventHandler: DCBX Started
(%x)
120377
For FCoE protocol, the FCF
configuration error occurred.
InfoFC#%d: QLIsrEventHandler: FCF Config
Error (%x), MB1=%x
120378
For FCoE protocol, the DCBX
parameters are changed.
InfoFC#%d: QLIsrEventHandler: DCBX Parameter
Changed (%x)
120379
RPC (remote procedure call) server
initialization entry point.
ErrorUserQBRPC_Initialize: Entered139265
Get System API memory allocation
failed.
ErrorUserQBRPC_Initialize:GetBridge Mem
Allocation error
139266
Get System Advanced API memory
allocation failed.
ErrorUserQBRPC_Initialize:GetBridgeAdv Mem
Allocation error
139267
Get Management API memory
allocation failed.
ErrorUserQBRPC_Initialize:GetMgmt Mem
Allocation error
139268
Get Management API memory
allocation failed.
ErrorUserQBRPC_Initialize:GetMgmt Mem
Allocation error
139269
Get iSCSI advanced API memory
allocation failed.
ErrorUserQBRPC_Initialize:GetIscsiAdv Mem
Allocation error
139270
Get iSNS API memory allocation
failed.
ErrorUserQBRPC_Initialize:GetIsns Mem
Allocation error
139271
Get Fibre Channel Interface API
memory allocation failed.
ErrorUserQBRPC_Initialize:GetFcIntfc Mem
Allocation error
139272
131