HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Table 9 MPX200 Router log messages (continued)
Description
Msg
type
Module
typeLog messageID
Completed readjusting the serial
schedule priority of migration jobs.
InfoUserqapireadjustpriority_1_svc: Readjust
Priority Done
152105
An update migration action
[Start/Stop/Pause/Resume] has
failed.
InfoUserqapiupdatemigration_1_svc: Update
Migration returned with error %d
152106
Failed to remove a migration job with
ID specified in the log.
InfoUserRemoveMigration:%d with Job Id %d and
error = %d
152107
Reset the serial schedule delayed
time to invalid if the last serial
schedule job was removed.
InfoUserValidateSerialSchedule: Previous time
%ld New time %ld
152108
Failed to create a migration job.InfoUseraddMigration: Creating migration Job
Failed with error %d
152109
Left power and cooling module
(PCM) is or has been installed.
InfoUsersysTempMon: Left PCM Installed152129
Left PCM is or has been uninstalled.InfoUsersysTempMon: Left PCM Un-installed152130
Right PCM is or has been installed.InfoUsersysTempMon: Right PCM Installed152131
Right PCM is or has been uninstalled.InfoUsersysTempMon: Right PCM Un-installed152132
Left PCM is connected to AC power.InfoUsersysTempMon: Power for Left PCM
Plugged-in
152133
Left PCM is not connected to AC
power (unplugged).
InfoUsersysTempMon: Power for Left PCM
Un-plugged
152134
Right PCM is connected to AC
power.
InfoUsersysTempMon: Power for Right PCM
Plugged-in
152135
Right PCM is not connected to AC
power (unplugged).
InfoUsersysTempMon: Power for Right PCM
Un-plugged
152136
Left PCM (#1) is reporting a faulty
fan.
InfoUsersysTempMon: Slot 1 (R1) PCM Fan%d
faulty
152137
Right PCM (#2) is reporting a faulty
fan.
InfoUsersysTempMon: Slot 2 (R2) PCM Fan%d
faulty
152138
Left PCM (#1) is reporting a healthy
fan.
InfoUsersysTempMon: Slot 1 (R1) PCM Fan%d
healthy
152139
Right PCM (#2) is reporting a healthy
fan.
InfoUsersysTempMon: Slot 2 (R2) PCM Fan%d
healthy
152140
Router has detected an over
temperature, Front: %dC Rear: %dC
CPU1: %dC CPU2: %dC
InfoUsersysTempMon: Over Temperature Front:
%dC Rear: %dC CPU1: %dC CPU2: %dC
152141
Fan speed has been set to high.InfoUsersysTempMon: Setting the fan speed to
high
152142
Fan speed has been set to normal.InfoUsersysTempMon: Setting the fan speed to
normal
152143
Router temperature has returned to
normal operating range, Front: %dC
Rear: %dC CPU1: %dC CPU2: %dC
InfoUsersysTempMon: Temperature back to safe
value. Front: %dC Rear: %dC CPU1: %dC
CPU2: %dC
152144
135