HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

MPX200 <1> (admin) #> fciproute rm
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q' or
'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both GE ports.
Route FC Port ID GE Port ID
----- ---------- ----------
1 FC1 GE1
Please select a FCIP route from the list above ('q' to quit): 1
FCIP Route 1 has been removed from the system.
fru
Saves and restores the router’s configuration.
Authority
Admin session to restore
Syntax
fru {restore | save}
Keywords
restore The fru restore command requires that you first FTP the tar file containing the
configuration to the router. When you issue this command, the system prompts you to enter the
restore level. You can fully restore the router’s configuration (all configuration parameters and LUN
mappings) or restore only the LUN mappings. The restored configuration does not take effect until
the router is rebooted.
save The fru save command creates a tar file containing the blade’s persistent data,
configuration, and LUN mappings. The file is stored in the router’s /var/ftp directory. You must
then FTP the tar file from the router.
Examples
MPX200 <1> (admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the ENTER key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.
The following example shows the fru save command:
MPX200 <1> (admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.
help
Lists the MPX200 CLI commands and syntax. The MPX200 includes the following help command
sets:
• General
• iSCSI Server Connectivity
fru 17