HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

----- ---- ------ ----------------------

0 FC LoggedIn 50:05:07:68:02:00:13:05,50:05:07:68:02:40:13:05

1 FC LoggedIn 50:05:07:68:02:00:13:47,50:05:07:68:02:20:13:47

2 FC LoggedOut 50:05:07:68:02:00:13:46,50:05:07:68:02:20:13:46

3 FC LoggedIn 50:01:10:a0:00:17:60:67,50:01:10:a0:00:17:60:66

4 FC LoggedOut 50:01:10:a0:00:17:60:65,50:01:10:a0:00:17:60:64

5 FC LoggedOut 20:00:00:c0:dd:13:17:35,21:00:00:c0:dd:13:17:35

6 ISCSI LoggedOut iqn.qlogic.com

Please select a 'LoggedOut' Initiator from the list above ('q' to quit): 6

All attribute values for that have been changed will now be saved.

iSCSI

Discovers, logs into, and logs out of the specified iSCSI device.

Authority

Admin session

Syntax

iscsi [discover | login | logout]

Keywords

discover discovers a specific iSCSI device.

logout logs out of a specific iSCSI device.

Examples

MPX200 <1> (admin) #> iscsi discover

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

IP Address (IPv4 or IPv6) [0.0.0.0 ] 10.3.5.6

TCP Port No. [3260 ]

Outbound Port (1=GE1, 2=GE2, ...) [GE1 ]

Target CHAP (0=Enable, 1=Disable) [Disabled ]

The following example shows the iscsi logout command:

MPX200 <1> #> iscsi logout

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Index (WWNN,WWPN/iSCSI Name)

----- ----------------------

0 iqn.2001-05.com.equallogic:0-8a0906-0aca53601-cd01c5a39984d7dc-isr6152-lun-3

Please select a Target from the list above ('q' to quit): 0

Index IP Address

----- ----------

0 20.20.20.2

Please select a IP Address from the list above ('q' to quit): 0

iSCSI 27