HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Please select a LUN from the target ('q' to quit): 7
Index MappedId Type Initiator
----- -------- ---- ---------
0 7 ISCSI iqn.qlogic.com
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
LUN remap
Maps a target LUN mapping to an initiator, or removes a target LUN mapping from an initiator
where the LUN ID is remapped.
Authority
Admin session
Syntax
lunremap {add | rm}
Keywords
add maps a LUN to an initiator with any different LUN ID.
rm removes the mapping of a LUN from an initiator.
Examples
MPX200 <1> (admin) #> lunremap add
Index Type Mapped (WWNN,WWPN/iSCSI Name)
----- ---- ------ ----------------------
0 FC No 20:00:00:e0:8b:1d:73:63,21:00:00:e0:8b:1d:73:63
1 FC Yes 20:01:00:1b:32:31:12:79,21:01:00:1b:32:31:12:79
Please select an Initiator from the list above ('q' to quit): 1
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:11:c6:17:0f:02,21:00:00:11:c6:17:0f:02
1 20:00:00:11:c6:17:12:77,21:00:00:11:c6:17:12:77
2 20:00:00:11:c6:17:0f:11,21:00:00:11:c6:17:0f:11
3 20:00:00:11:c6:17:0f:07,21:00:00:11:c6:17:0f:07
4 20:00:00:11:c6:17:0e:d9,21:00:00:11:c6:17:0e:d9
5 20:00:00:11:c6:17:18:3e,21:00:00:11:c6:17:18:3e
6 20:00:00:11:c6:17:0f:0f,21:00:00:11:c6:17:0f:0f
7 20:00:00:11:c6:17:0e:c6,21:00:00:11:c6:17:0e:c6
Please select a Target from the list above ('q' to quit): 3
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
Multiple VpGroups are currently 'ENABLED'.
Please select a VpGroup from the list above ('q' to quit): 1
Index (LUN/VpGroup) Serial Number/WWULN
----- ------------- -------------------
0 0/VPGROUP_1 3KQ015PK000075091D8W
20:00:00:11:c6:17:0f:07
Please select a LUN to present to the initiator ('q' to quit): 0
32 Command reference