HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Please Assign a ID which maps the initiator to the LUN: [0 ]: 5
All attribute values that have been changed will now be saved.
Use the targetmap add command with VPGroup Global for presenting the target.
The following example shows the lunremap rm command:
MPX200 <1> (admin) #> lunremap rm
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:05:07:68:02:00:0f:03,50:05:07:68:02:10:0f:03
1 50:05:07:68:02:00:0f:02,50:05:07:68:02:10:0f:02
2 20:00:00:11:c6:17:0f:02,21:00:00:11:c6:17:0f:02
3 20:00:00:11:c6:17:12:77,21:00:00:11:c6:17:12:77
4 20:00:00:11:c6:17:0f:11,21:00:00:11:c6:17:0f:11
5 20:00:00:11:c6:17:0f:07,21:00:00:11:c6:17:0f:07
6 20:00:00:11:c6:17:0e:d9,21:00:00:11:c6:17:0e:d9
7 20:00:00:11:c6:17:18:3e,21:00:00:11:c6:17:18:3e
8 20:00:00:11:c6:17:0f:0f,21:00:00:11:c6:17:0f:0f
9 20:00:00:11:c6:17:0e:c6,21:00:00:11:c6:17:0e:c6
Please select a Target from the list above ('q' to quit): 3
Index (LUN/VpGroup) Serial Number/WWULN
----- ------------- -------------------
0 0/VPGROUP_1 3KQ0161400007514H3QK
20:00:00:11:c6:17:12:77
Please select a LUN presented to the initiator ('q' to quit): 0
Index MappedId Type Initiator
----- -------- ---- ---------
0 2 FC 20:01:00:1b:32:31:12:79
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
password
Changes the guest and administrator passwords.
Authority
Admin session
Syntax
passwd
Example
MPX200 <1> (admin) #> passwd
Press 'q' and the ENTER key to abort this command.
Select password to change (0=guest, 1=admin, 2=miguser) : 2
account OLD password : *********
account NEW password (6-128 chars) : *********
please confirm account NEW password : *********
Password has been changed.
password 33