HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Please select a REMOTE system from the list above ('q' to quit) : 0
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:1b:32:94:e2:8c,21:00:00:1b:32:94:e2:8c
Please select a LOCAL device from the list above ('q' to quit) : 0
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:18:62:6f:d7:7c,21:00:00:18:62:6f:d7:7c
1 20:00:00:18:62:6f:d9:af,21:00:00:18:62:6f:d9:af
2 20:00:00:18:62:6f:d9:c1,21:00:00:18:62:6f:d9:c1
3 20:00:00:18:62:6f:d8:f5,21:00:00:18:62:6f:d8:f5
4 20:00:00:18:62:6f:d9:49,21:00:00:18:62:6f:d9:49
5 20:00:00:18:62:6f:d7:5e,21:00:00:18:62:6f:d7:5e
6 20:00:00:18:62:6f:d8:da,21:00:00:18:62:6f:d8:da
7 20:00:00:18:62:6f:d7:6f,21:00:00:18:62:6f:d7:6f
8 20:00:00:18:62:6f:d7:8b,21:00:00:18:62:6f:d7:8b
9 20:00:00:18:62:6f:d9:5d,21:00:00:18:62:6f:d9:5d
10 20:00:00:18:62:6f:d7:79,21:00:00:18:62:6f:d7:79
11 20:00:00:18:62:6f:d9:86,21:00:00:18:62:6f:d9:86
12 20:00:00:18:62:6f:d9:bf,21:00:00:18:62:6f:d9:bf
13 20:00:00:18:62:6f:d9:85,21:00:00:18:62:6f:d9:85
14 20:00:00:18:62:6f:d9:10,21:00:00:18:62:6f:d9:10
15 20:00:00:18:62:6f:d8:e1,21:00:00:18:62:6f:d8:e1
Please select a REMOTE device from the list above ('q' to quit) : 0
Smart-Write (0=Enable, 1=Disable) [Enabled ]
Smart-Write Compression (0=Enable, 1=Disable) [Disabled ]
Smart-Write Load Balance (0=Enable, 1=Disable) [Disabled ]
Local & Remote Device are EVA port (0=No, 1=Yes) [No ]
All attribute values that have been changed will now be saved.
The following example shows the remotemap mod command:
MPX200 <1> (admin) #> remotemap mod
The following wizard will be used to modify various settings of
a remote mapping. If you wish to terminate this wizard before reaching
the end of the list press 'q' or 'Q' and the ENTER key to do so.
Index Local Device (WWPN) Remote Device (WWPN)
----- ------------------- --------------------
0 21:00:00:1b:32:94:e2:8c 21:00:00:18:62:6f:d7:7c
Please select a remote mapping from the list above ('q' to quit): 0
Smart-Write (0=Enable, 1=Disable) [Enabled ]
Smart-Write Compression (0=Enable, 1=Disable) [Disabled ] 0
Smart-Write Load Balance (0=Enable, 1=Disable) [Disabled ] 0
All attribute values that have been changed will now be saved.
The following example shows the remotemap rm command:
MPX200 <1> (admin) #> remotemap rm
The following wizard will query for attributes before persisting
and activating the updated mapping in the system configuration.
If you wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index Local Device (WWPN) Remote Device (WWPN)
----- ------------------- --------------------
36 Command reference