HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Please select an ISCSI IP Address from REMOTE system above(IPv4 or IPv6)
[0.0.0.0 ] 10.10.10.178
iSCSI Port 1 IPv4 Address 10.10.10.177
iSCSI Port 1 IPv6 Link-Local fe80::2c0:ddff:fe1e:a790
iSCSI Port 2 IPv4 Address 20.20.20.177
iSCSI Port 2 IPv6 Link-Local fe80::2c0:ddff:fe1e:a791
iSCSI Port 3 IPv6 Link-Local fe80::2c0:ddff:fe1e:a792
iSCSI Port 4 IPv6 Link-Local fe80::2c0:ddff:fe1e:a793
Please select an ISCSI IP Address from LOCAL system above(IPv4 or IPv6)
[0.0.0.0 ] 10.10.10.177
Connect to Remote System MPX200(1047J00014) using connection(s):
0) 20.20.20.177(LOCAL) to 20.20.20.178(REMOTE)
1) 10.10.10.177(LOCAL) to 10.10.10.178(REMOTE)
Modifying the remote system may cause the loss of connection to
the remote system and any remote mappings assocated with it.
Do you wish to modify the REMOTE system (y/n): y
All attribute values that have been changed will now be saved.
The following example shows the remotepeer rm command:
MPX200 <1> (admin) #> remotepeer rm
Index (Symbolic Name/Serial Number)
----- -----------------------------
0 Blade-1(1102F00214)
Please select a remote system from the list above ('q' to quit): 0
All attribute values that have been changed will now be saved.
reset
Restores the router configuration parameters to the factory-default values.
The reset factory command deletes all LUN mappings, as well as all persistent data regarding
targets, LUNs, initiators, virtual port group settings, log files, iSCSI and MGMT IP addresses, Fibre
Channel and Ethernet port statistics, and passwords. This command also restores the factory default
IP addresses.
The reset mappings command clears only the LUN mappings.
Authority
Admin session
Syntax
reset {factory | mappings}
Examples
MPX200 <1> (admin) #> reset factory
Are you sure you want to restore to factory default settings (y/n): y
Please reboot the System for the settings to take affect.
The following example shows the reset mappings command:
MPX200 <1> (admin) #> reset mappings
reset 39