HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Are you sure you want to reset the mappings in the system (y/n): y
Please reboot the System for the settings to take affect.
save
Saves logs, traces, and port statistics.
Authority
Admin session
Syntax
save {capture | logs | traces | portstats [fc | gige]}
Keywords
capture creates a debug file that captures all debug dump data. After the command completes,
you must FTP the debug capture file from the blade.
logs creates a tar file that contains the router’s log data, storing the file in the router’s /var/ftp
directory. After the command completes, you must FTP the log’s tar file from the blade.
traces creates a tar file that contains the router’s dump data, storing the tar file in the router’s
/var/ftp directory. After the command completes, you must FTP the trace’s tar file from the blade.
After executing this command, the system notifies you if the router does not have any dump data.
Each time it generates dump data, the system adds an event log entry.
portstats saves the Fibre Channel or GbE port statistics in a CSV file format in the /var/ftp
directory. After the command is complete, you must FTP the file from the blade.
Examples
MPX200 <1> (admin) #> save capture
Debug capture completed. Package is System_Capture.tar.gz
Please use FTP to extract the file out from the System.
The following example shows the save logs command:
MPX200 <1> (admin) #> save logs
Save Event Logs completed. Package is Router_Evl.tar.gz
Please use FTP to extract the file out from the System.
The following example shows the save traces command:
MPX200 <1> (admin) #> save traces
Save ASIC Traces completed. Package is Router_Asic_Trace.tar.gz
Please use FTP to extract the file out from the System.
The following examples show the save portstats command for both a Fibre Channel and a
GbE port:
MPX200 <1> (admin) #> save portstats fc 1
Fc Port 1 statistics are successfully stored at /var/ftp/fcMonStats1.csv
Please FTP to get the statistics file.
MPX200 <1> (admin) #> save portstats gige 1
Gige Port 1 statistics are successfully stored at /var/ftp/gigeMonStats1.csv
Please FTP to get the statistics file.
40 Command reference