HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Syntax

set event_notification

Example

MPX200 <1> (admin) #> set event_notification

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Notification (0=Enable, 1=Disable) [Disabled ] 0

Notification Method (1=HTTP) [HTTP ]

URL [ ] www.abcdefg.xyz

All attribute values that have been changed will now be saved.

set fc

Configures a Fibre Channel port.

Authority

Admin session

Syntax

set fc [<port_num>]

Keywords

[<port_num>] the number of the Fibre Channel port to be configured.

Example

MPX200 <1> (admin) #> set fc

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If

you wish to terminate this process before reaching the end of the list press

'q' or 'Q' and the ENTER key to do so.

WARNING:

The following command might cause a loss of connections to both ports.

Configuring FC Port: 1

-------------------------

Link Rate (0=Auto, 1=1Gb, 2=2Gb) [Auto ]

Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]

Execution Throttle (Min=16, Max=256) [64 ]

Programmed Connection Option:

(0=Loop Only, 1=P2P Only, 2=Loop Pref) [Loop Pref ]

All attribute values for Port 1 that have been changed will now be saved.

Configuring FC Port: 2