HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

set features
Applies license keys to the router. The date and time must be set on the router prior to applying a
new feature key.
Authority
Admin session
Syntax
set features
Example
MPX200 <1> (admin) #> set features
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Enter feature key to be saved/activated: 1-LCURGL0FHDGQI-MPX200-SW
Feature Key is added to the blade.
All attribute values that have been changed will now be saved.
set iscsi
Configures an iSCSI port.
Authority
Admin session
Syntax
set iscsi [<port_num>]
Keywords
[<port_num>] the number of the iSCSI port to be configured.
Example
MPX200 <1> (admin) #> set iscsi 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 1
---------------------------
Port Status (0=Enable, 1=Disable) [Enabled ]
Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ]
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ]
Window Size (Min=8124B, Max=1048576B) [65536 ]
IPv4 Address [10.3.5.205 ]
IPv4 Subnet Mask [255.255.255.0 ]
IPv4 Gateway Address [0.0.0.0 ]
IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ]
set features 45