HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)
Authority
Admin session
Syntax
set vpgroups [<vpgroup_index>]
Example
The following example shows how to enable virtual port groups 2 and 3:
MPX200 <1> (admin) #> set vpgroups
The following wizard will query for attributes before persisting
and activating the updated mapping in the system configuration.
If you wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring VpGroup: 1
-------------------------
Status (0=Enable, 1=Disable) [Enabled ]
VpGroup Name (Max = 64 characters) [VPGROUP_1 ]
All attribute values for VpGroup 1 that have been changed will now be saved.
Configuring VpGroup: 2
-------------------------
Status (0=Enable, 1=Disable) [Disabled ] 0
VpGroup Name (Max = 64 characters) [VPGROUP_2 ]
All attribute values for VpGroup 2 that have been changed will now be saved.
Configuring VpGroup: 3
-------------------------
Status (0=Enable, 1=Disable) [Disabled ] 0
VpGroup Name (Max = 64 characters) [VPGROUP_3 ]
All attribute values for VpGroup 3 that have been changed will now be saved.
Configuring VpGroup: 4
-------------------------
Status (0=Enable, 1=Disable) [Disabled ]
All attribute values for VpGroup 4 that have been changed will now be saved.
show
Displays blade operational information.
Authority
None
Syntax
show {chap | chassis | event_notification | fc [<port_num>] | fciproutes
[<link_id>] | feature_keys | features | initiators [fc | iscsi] |
initiators_lunmask | iostats | iscsi [<port_num>] | isns [<port_num>]
| logs [<entries>] | luninfo | lunmask | luns | memory | mgmt | ntp |
perf [byte | init_rbyte | init_wbyte | tgt_rbyte | tgt_wbyte] | portstats
[[fc | gige] <port_no> <hours | mins> <duration>] | presented_targets
[fc | iscsi] | properties | remotemaps | remotepeers | rpcinfo | snmp
| stats | swdevices | system | targets [fc | iscsi] | vpgroups
[<vpgroup_index>] | zone}
50 Command reference