HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Product Name MPX200
Symbolic Name Blade-2
Serial Number 0836E00018
HW Version 20694-03 A
SW Version 3.3.0.0
Temp (Front/Rear/CPU1/CPU2) 46C/34C/38C/38C
Power Cooling Module 2
----------------------
Status Installed
Power Source Not Connected
Fan1/Fan2/Fan3 Healthy/Healthy/Healthy
show event notification
Displays event notification status (enabled or disabled) and URL (IP address).
Authority
None
Syntax
show event_notification
Example
MPX200 <1> #> show event_notification
EventNotification Info
----------------------
Http Enabled
Url 172.17.136.68
show fc
Displays Fibre Channel port information for the specified port. If you do not specify a port, this
command displays all ports.
Authority
None
Syntax
show fc {<port_num>}
Keywords
{<port_num>} identifies the number of the Fibre Channel port to display.
Example
MPX200 <1> #> show fc 2
FC Port Information
---------------------
FC Port FC2
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 8Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:12:cd:92 (VPGROUP_1)
WWPN 21:00:00:c0:dd:12:cd:92 (VPGROUP_1)
52 Command reference