HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Port ID 7e-04-ef (VPGROUP_1)
WWNN 20:01:00:c0:dd:12:cd:92 (VPGROUP_2)
WWPN 21:01:00:c0:dd:12:cd:92 (VPGROUP_2)
Port ID 7e-04-e8 (VPGROUP_2)
WWNN 20:02:00:c0:dd:12:cd:92 (VPGROUP_3)
WWPN 21:02:00:c0:dd:12:cd:92 (VPGROUP_3)
Port ID 7e-04-e4 (VPGROUP_3)
WWNN 20:03:00:c0:dd:12:cd:92 (VPGROUP_4)
WWPN 21:03:00:c0:dd:12:cd:92 (VPGROUP_4)
Port ID 7e-04-e2 (VPGROUP_4)
Firmware Revision No. 5.03.14
Frame Size 2048
Execution Throttle 256
Connection Mode Loop
Programmed Connection Option Loop Preferred
SFP Type 8Gb
show fcip routes
Displays FCIP route configuration parameters.
Authority
None
Syntax
show fciproutes [<link_id>]
Keywords
[<link_id>] specifies the number of the FCIP route to be displayed (1 or 2).
Example
MPX200 <2> #> show fciproutes
FCIP Route Information
------------------------
FCIP Route 1
FCIP Interfaces Status Enabled
FCIP Link Status Down
FC Port FC1
GE Port GE1
GE Link Status Up
Local IP Address 172.35.15.11
Remote IP Address 172.17.136.18
Subnet Mask 255.255.254.0
Gateway IP Address 0.0.0.0
MTU Size Normal
TCP Window Size 32768
Window Scaling Enabled
Window Scaling Factor 7
TCP Port No 3225
Current GE Port Speed 1Gb/FDX
Programmed GE Port Speed Auto
Bandwidth, Mbit/sec 1000
VLAN Disabled
FCIP SW Compression Auto
show feature keys
Lists the features currently licensed for the router, the license key for each, and the date the license
was applied.
show fcip routes 53