HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Read Count 0
Write Count 0
show iscsi
Displays iSCSI information for the specified port. If you do not specify the port, this command
displays all ports.
Authority
None
Syntax
show iscsi [<port_num>]
Keywords
[<port_num>] the number of the iSCSI port to be displayed.
Example
MPX200 <1> (admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port GE1
Port Status Enabled
Port Mode iSCSI
Link Status Up
iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.3u7940k007.b1
Firmware Revision 3.00.01.57
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Jumbo
Window Size 65536
MAC Address 00-c0-dd-13-ae-b6
IPv4 Address 10.3.5.6
IPv4 Subnet Mask 255.255.255.0
IPv4 Gateway Address 0.0.0.0
IPv4 Target TCP Port No. 3260
IPv4 VLAN Disabled
IPv6 Address 1 ::
IPv6 Address 2 ::
IPv6 Link Local fe80::2c0:ddff:fe13:aeb6
IPv6 Default Router ::
IPv6 Target TCP Port No. 3260
IPv6 VLAN Disabled
iSCSI Max First Burst 65536
iSCSI Max Burst 262144
iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
Bandwidth, MB/sec 125
iSCSI Port GE2
Port Status Enabled
Port Mode iSCSI
Link Status Up
iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.3u7940k007.b1
Firmware Revision 3.00.01.57
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Jumbo
Window Size 32768
MAC Address 00-c0-dd-13-ae-b7
IPv4 Address 10.3.5.7
show iscsi 57