HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

iSCSI Max Burst 262144
iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
Bandwidth, MB/sec 1250
show isns
Displays iSNS configuration information for the specified iSCSI port. If you do not specify the port,
this command displays the iSNS configuration information for all iSCSI ports.
Authority
None
Syntax
show isns [<port_num>]
Keywords
[<port_num>] is the iSCSI port number whose iSNS configuration is to be displayed.
Example
MPX200 <2> (admin) #> show isns
iSNS Information
----------------
iSNS Disabled
IP Address 0.0.0.0
TCP Port No. 3205
show logs
Displays either all or a portion of the router event log.
Authority
None
Syntax
show logs [<last_x_entries>]
Keywords
show logs [<last_x_entries>] shows only the last x number of logs entries. For example,
show logs 10 displays the last ten entries in the router event log.
The show logs command, with no number specified, displays the entire router event log.
Example
MPX200 <1> #> show logs
01/01/2011 00:00:13 System 3 Tuesday 01 January 12:13 AM
01/01/2011 00:00:21 QL4022 3 #0: QLIsrDecodeMailbox: Link up
01/01/2011 00:00:13 System 3 Tuesday 01 January 12:13 AM
01/01/2011 00:00:22 QL4022 3 #0: QLIsrDecodeMailbox: Link up
show LUN info
Displays complete information for a specified LUN and target.
show isns 59