HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Examples
MPX200 <1> #> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 8M 9M 0 0 17M
GE2 0 0 0 0 0
GE3 0 0 0 0 0
GE4 0 0 0 0 0
FC1 7M 7M 0 0 15M
FC2 0 0 0 0 0
MPX200 <1> #> show perf byte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2 GE3 GE4 FC1 FC2 FCIP1Cx
--------------------------------------------------------
11M 0 0 0 10M 0 0
12M 0 0 0 10M 0 0
12M 0 0 0 11M 0 0
12M 0 0 0 10M 0 0
12M 0 0 0 11M 0 0
12M 0 0 0 11M 0 0
12M 0 0 0 11M 0 0
11M 0 0 0 10M 0 0
11M 0 0 0 10M 0 0
13M 0 0 0 11M 0 0
12M 0 0 0 11M 0 0
12M 0 0 0 11M 0 0
12M 0 0 0 11M 0 0
11M 0 0 0 10M 0 0
13M 0 0 0 12M 0 0
13M 0 0 0 11M 0 0
14M 0 0 0 13M 0 0
14M 0 0 0 14M 0 0
16M 0 0 0 15M 0 0
17M 0 0 0 16M 0 0
17M 0 0 0 15M 0 0
17M 0 0 0 16M 0 0
MPX200 <1> #> show perf init_rbyte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (initiator mode read)... (Press any key to
stop display)
GE1 GE2 GE3 GE4 FC1 FC2
---------------------------------------
0 0 0 0 0 0
0 0 0 0 0 0
MPX200 <1> #> show perf tgt_wbyte
WARNING: Valid data is only displayed for port(s) that are not
64 Command reference