HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

iSCSI Presented Targets
-------------------------
Name iqn.2000-04.com.qlogic:MPX200:0.50001fe150069d20.50001fe150069d2c
IP 10.3.5.66
CHAP Disabled
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name iqn.2000-04.com.qlogic:MPX200:1.50001fe150069d20.50001fe150069d2c
IP 10.3.5.67
CHAP Disabled
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name iqn.2000-04.com.qlogic:MPX200:0.50001fe150011150.50001fe150011158
IP 10.3.5.66
CHAP Disabled
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Name iqn.2000-04.com.qlogic:MPX200:1.50001fe150011150.50001fe150011158
IP 10.3.5.67
CHAP Disabled
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
show properties
Displays the router blade CLI properties.
Authority
None
Syntax
show properties
Example
MPX200 <1> #> show properties
CLI Properties
----------------
Inactivty Timer 15 minutes
Prompt String MPX200
show remote maps
Displays all remote maps that have been configured.
Authority
None
Syntax
show remotemaps
68 Command reference