HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

MPX200 <1> #> show targets iscsi
Target Information
--------------------
iSCSI Name
iqn.2001-05.com.equallogic:0-8a0906-bc4a49907-3b4fb16b0b14c529-demo
Alias
State Online
IP Address 10.3.5.2 (Logged In --> GE1)
iSCSI Name
iqn.2001-05.com.equallogic:0-8a0906-fc9829a07-d41fb16bae64cffa-demo-1
Alias
State Online
IP Address 10.3.5.2 (Logged In --> GE1)
iSCSI Name
iqn.2001-05.com.equallogic:0-8a0906-01e829a07-58afb16bae94cffb-demo-2
Alias
State Online
IP Address 10.3.5.2 (Logged In --> GE1)
show vpgroups
Displays information about the blade’s configured virtual port groups.
Authority
None
Syntax
show vpgroups [<vp_index>]
Keywords
<vp index> the number (1–4) of the virtual port group to be displayed.
Examples
The following example shows the show vpgroups command for a specific virtual port group:
MPX200 <1> #> show vpgroups 2
VpGroup Information
---------------------
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
The following example shows the show vpgroups command for all virtual port groups:
MPX200 <1> #> show vpgroups
VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f9
show vpgroups 77