HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

target
Removes an offline target from the blade’s database. Typically, you will use this command to
remove targets from the database that are no longer connected to the router.
NOTE: The target add command is not currently supported.
Authority
Admin session
Syntax
target {add | rm}
Keywords
add not supported.
rm removes a target from the router’s target database.
Example
MPX200 <1> (admin) #> target rm
Index State (WWNN,WWPN/iSCSI Name)
----- ----- ----------------------
0 Offline 20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf
1 Online 20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86
2 Online 20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d
3 Online 20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa
Please select an OFFLINE Target from the list above ('q' to quit): 0
All attribute values for that have been changed will now be
saved.
target map
Presents or removes existing presentation of discovered Fibre Channel and iSCSI targets on Fibre
Channel and iSCSI ports.
Authority
Admin session
Syntax
targetmap {add |rm}
Keywords
add adds the target presentation.
rm removes the target presentation by removing a target from the router’s target database.
Examples
The following example shows the targetmap add command using the manual option:
MPX200 <1> (admin) #> targetmap add
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49
80 Command reference