HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)
1 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:4d
2 50:06:01:60:c1:e0:49:2e,50:06:01:62:41:e0:49:2e
3 50:06:01:60:c1:e0:49:2e,50:06:01:6a:41:e0:49:2e
4 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18
5 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1c
6 50:0a:09:80:88:8c:a7:79,50:0a:09:82:98:8c:a7:79
7 50:0a:09:80:88:8c:a7:79,50:0a:09:82:88:8c:a7:79
Please select a target from the list above ('q' to quit): 7
Index (IP/WWNN) (MAC/WWPN) (Portal)
----- ----------- ------------ --------
0 20.20.20.79 00-c0-dd-18-cf-91 1GE1
1 0.0.0.0 00-c0-dd-18-cf-92 1GE2
2 20:00:00:c0:dd:18:cf:91 21:00:00:c0:dd:18:cf:91 FC1
3 20:00:00:c0:dd:18:cf:92 21:00:00:c0:dd:18:cf:92 FC2
Please select a portal from the list above ('q' to quit): 2
Do you want to automap the selected target (Yes/No) [Yes ]No
Only Byte 1 of the selected FC portal is allowed to be modified.
Valid range for Byte 1 is 09-FF. Ex: 09, 0A, 0B....
Ex: 21:09:00:c0:dd:18:cf:91
FC presented target WWPN [ ] : 21:09:00:c0:dd:18:cf:91
Only Byte 1 of the selected FC portal is allowed to be modified.
Valid range for Byte 1 is 09-FF. Ex: 09, 0A, 0B....
Ex: 20:09:00:c0:dd:18:cf:91
FC presented target WWNN [ ] : 20:09:00:c0:dd:18:cf:91
All attribute values that have been changed will now be saved.
The following example shows the targetmap add command using the automap option:
MPX200 <1> (admin) #> targetmap add
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49
1 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:4d
2 50:06:01:60:c1:e0:49:2e,50:06:01:62:41:e0:49:2e
3 50:06:01:60:c1:e0:49:2e,50:06:01:6a:41:e0:49:2e
4 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18
5 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1c
6 50:0a:09:80:88:8c:a7:79,50:0a:09:82:98:8c:a7:79
7 50:0a:09:80:88:8c:a7:79,50:0a:09:82:88:8c:a7:79
Please select a target from the list above ('q' to quit): 6
Index (IP/WWNN) (MAC/WWPN) (Portal)
----- ----------- ------------ --------
0 20.20.20.79 00-c0-dd-18-cf-91 1GE1
1 0.0.0.0 00-c0-dd-18-cf-92 1GE2
2 20:00:00:c0:dd:18:cf:91 21:00:00:c0:dd:18:cf:91 FC1
3 20:00:00:c0:dd:18:cf:92 21:00:00:c0:dd:18:cf:92 FC2
Please select a portal from the list above ('q' to quit): 3
Do you want to automap the selected target (Yes/No) Yes
All attribute values that have been changed will now be saved.
The following example shows the targetmap rm command:
MPX200 <1> admin) #> targetmap rm
Warning: This command will cause the removal of all mappings and hosts
target map 81