HP MPX200 Mutifunction Router Command Line Interface User Guide (5697-2512, May 2013)

Priority GroupPercentage 0
FC Port FCOE2
Port Status Enabled
Port Mode FCP
Link Status Down
Current Link Rate Unknown
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:17:eb
WWPN 21:00:00:c0:dd:13:17:eb
Port ID 00-00-00
Firmware Revision No. 5.02.03
Frame Size 2048
Execution Throttle 256
Connection Mode Unknown
SFP Type 10Gb
Enode MAC Address 00-c0-dd-13-17-ef
Fabric Provided MAC Address 00-00-00-00-00-00
VlanId 0
Priority Level 0
Priority GroupId 0
Priority GroupPercentage 0
MPX200 <1> (admin) #>
NOTE: In the preceding example the VP index (see vp the index keyword in “show vpgroups”
(page 77)) is in the second byte from the left, and the Fibre Channel port indicator is in the right-most
byte.
92 Virtual port groups