HP MSA 1040 SMU Reference Guide (762784-001, March 2014)

Viewing information about an enclosure 119
Controller module: CompactFlash properties
When you select a CompactFlash card in the Rear Tabular view, a table shows:
Health.
OK
Fault
Health Reason. If Health is not OK, this field shows the reason for the health state.
Health Recommendation. If Health is not OK, this field shows recommended actions to take to resolve the health
issue.
Status.
Cache Flush.
Enabled: If the controller loses power, it will automatically write cache data to the CompactFlash card. Cache
flush is normally enabled, but is temporarily disabled during controller shut down.
Disabled: Cache flush is disabled.
Drive enclosure: I/O module properties
When you select an I/O module, a table shows:
Health.
OK
Degraded
Fault
Unknown
Health Reason. If Health is not OK, this field shows the reason for the health state.
Status.
Controller ID.
I/O module: In port properties
When you select an In port, a table shows:
Health.
OK
Degraded
Fault
N/A
Unknown
Health Reason. If Health is not OK, this field shows the reason for the health state.
Health Recommendation. If Health is not OK, this field shows recommended actions to take to resolve the health
issue.
Status.
Name.