HP MSA 1040 SMU Reference Guide (762784-001, March 2014)

Configuring SNMP event notification in SMU 153
External details for connUnitPortTable
Configuring SNMP event notification in SMU
1. Verify that the storage system’s SNMP service is enabled; see "Changing management interface settings"
(page 40).
2. Configure and enable SNMP traps; see "Configuring SNMP notification" (page 42).
3. Optionally, configure a user account to receive SNMP traps; see "Configuring user accounts" (page 43).
SNMP management
You can manage storage devices using SNMP with a network management system such as HP System Insight
Manager (SIM), or HP Instant Support Enterprise Edition (ISEE). See their documentation for information about
loading MIBs, configuring events, and viewing and setting group objects.
In order to view and set system group objects, SNMP must be enabled in the storage system; see "Changing
management interface settings" (page 40). To use SNMPv3, it must be configured in both the storage system and the
network management system that intends to access the storage system or receive traps from it. In the storage system,
SNMPv3 is configured through the creation and use of SNMP user accounts, as described in "Configuring user
accounts" (page 43). The same users, security protocols, and passwords must be configured in the network
management system.
29 Power Supply 1 Voltage, 3.3V power-supply(5) power(9)
30 Power Supply 2 Voltage, 12V power-supply(5) power(9)
31 Power Supply 2 Voltage, 5V power-supply(5) power(9)
32 Power Supply 2 Voltage, 3.3V power-supply(5) power(9)
33 Overall Status enclosure(7) other(2)
Table 16 connUnitPortTable index and name values
connUnitPortIndex connUnitPortName
1 Host Port 1 (Controller A)
2 Host Port 2 (Controller B)
3 Host Port 1 (Controller A)
4 Host Port 2 (Controller B)
Table 15 connUnitSensorTable index, name, type, and characteristic values (continued)
connUnitSensorIndex connUnitSensorName connUnitSensorType connUnitSensor
Characteristic