HP MSA 2040 3.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Version: S200B26 Description This package delivers firmware for MSA 2040 drive enclosure I/O modules and includes enhanced features or fixes to issues found during use and additional qualification testing. NOTE: • If this drive enclosure is connected to an HP MSA 2040 array controller enclosure and you plan to update the firmware on the controller, this firmware package is not needed, because drive enclosure I/O module firmware is included in the controller firmware bundle.
• “Installation notes and best practices” (page 4) • “Installing firmware using Smart Components—Windows environments” (page 5) • “Installing firmware using Smart Components—Linux environments” (page 6) • “Installing firmware using the Storage Management Utility (SMU)” (page 7) • “Installing firmware using FTP” (page 8) Installation notes and best practices WARNING! Do not cycle power or restart devices during a firmware update.
Installing firmware using Smart Components—Windows environments This is a self-extracting executable module. You can execute this module from the Windows graphical user interface (GUI) or the Windows command prompt. GUI update method 1. 2. 3. 4. 5. 6. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads.
Installing firmware using Smart Components—Linux environments 1. 2. 3. 4. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. In single-domain environments, stop all I/O to vdisks in the enclosure before starting the firmware update. Open a Linux command console.
Installing firmware using the Storage Management Utility (SMU) 1. 2. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. If using a Smart Component, extract the contents of the Smart Component using one of the following methods: • In Windows—Click Extract on the first screen of the Smart Component. • In Linux—Enter a command using the following syntax: ./CPxxxxxx.
Installing firmware using FTP 1. 2. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. If using a Smart Component, extract the contents of the Smart Component using one of the following methods: • In Windows—Click Extract on the first screen of the Smart Component. • In Linux—Enter a command using the following syntax: ./CPxxxxxx.
11. Verify that the expected firmware version is installed on each module. • In the SMU, right-click the system in the Configuration View panel, and then select Tools > Update Firmware. • In the CLI, execute the show version or the show enclosures command.
