MSA 2040 SMU Reference Guide

122 Viewing system status
I/O module: In port properties
When you select an In port, a table shows:
• Health.
OK
Degraded
Fault
N/A
Unknown
• Health Reason. If Health is not OK, this field shows the reason for the health state.
• Health Recommendation. If Health is not OK, this field shows recommended actions to take to resolve the health
issue.
• Status.
• Name.
I/O module: Out port properties
When you select an Out port, a table shows:
• Health.
OK
Degraded
Fault
N/A
Unknown
• Health Reason. If Health is not OK, this field shows the reason for the health state.
• Health Recommendation. If Health is not OK, this field shows recommended actions to take to resolve the health
issue.
• Status.
• Name.
Viewing information about a remote system
In the Configuration View panel, right-click a remote system and select View > Overview. The System Information
table shows:
• The username and network-port IP addresses that are configured on the local system to access the remote system.
The configured password is not shown.
• Information such as the system name, location, and status that is read from the remote system.
To sign in to the remote system, click one of its IP address links.