MSA 2040 SMU Reference Guide
96 Viewing system status
• FDE Security Status
• Unsecured. The system has not been secured with a passphrase.
• Secured. The system has been secured with a passphrase.
• Secured, Lock Ready. The system has been secured, and lock keys have been cleared. The system will become
locked after the next power cycle.
• Secured, Locked. The system disks are locked. Data cannot be accessed until the correct lock key is set.
The System Redundancy table shows:
• Controller Redundancy Mode.
• Controller Redundancy Status.
• Controller A Status.
• Controller B Status.
Enclosure properties
When you select Enclosures in the System Overview table, a table displays the following information for each
enclosure:
• Health.
OK
Degraded
Fault
Unknown
If an enclosure’s health is not OK, select it in the Configuration View panel to view details about it.
• Enclosure ID.
• Enclosure WWN.
• Vendor.
• Model.
• Number of Disks. The number of disks installed in the enclosure.
Disk properties
When you select Disks in the System Overview table, a table shows:
• Health.
OK
Degraded
Fault
Unknown
If a disk’s health is not OK, select it in the Configuration View panel to view details about it.
• Enclosure ID.
• Slot. The number of the slot the disk resides in.
• Serial Number.
• Vendor.
• Model.
• Revision.
• Type.
• SAS: Enterprise SAS.
•SAS MDL: Midline SAS.
• sSAS: SAS SSD.