Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for External Boot with Novell NetWare - New Installations - Technical Note (October 2006)

Configuring the MSA1000/MSA1500cs for External Boot - NetWare 20
9. Next, you are presented with a list of devices found on the SAN. Note: If you
do not see any devices listed, there is a fibre cabling problem that will need to
be root caused. Arrow down to the MSA1000/1500cs that you want to boot
from (In this example, we are showing two MSA1500cs’s in the SAN). Once
the correct MSA is highlighted, press Enter.
10. The next screen shot shows the available LUNs on the selected MSA controller.
Arrow down to the LUN that you want to boot from, and press Enter to select.