Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for External Boot with Novell NetWare - New Installations - Technical Note (October 2006)

Configuring the MSA1000/MSA1500cs for External Boot - NetWare 24
Installation of Operating System
Completing the OS install to the Server
1. Install DOS on the boot disk. See your DOS Operating System Vendor’s documentation
for creating a bootable DOS partition.
2. Follow the standard NetWare instructions to begin the installation. Typically this is
accomplished by loading the DOS CD ROM device drives, and at the CD Drive prompt,
running the NetWare install (INSTALL.BAT).
3. At the Welcome to the NetWare server installation screen, select a Custom and New
Server install. This is necessary to allow the QLogic drivers to be loaded at the proper
time.